4G Systems Router Login – Default Username, Password, IP Address

4G Systems Router is a well known brand in European Countries. The company “4G Systems” manufactures 4G System routers which comes with a LED Display to show the signal strength and some settings. If you have been using any model of the 4G Systems Wireless Router, you need to read this guide. In this guide, we have shared complete info regarding 4G Systems Router Login, Default Password, Username and Default Gateway IP Address.

XSBox LTE model is the most famous product of the 4G Systems Wifi Router. Let’s now see how to log into the admin dashboard to change speed settings, security settings and much more. For that, we have also provided the password and username along with the IP address to follow.

4G Systems Default Gateway IP Address

4G Systems Admin IPVisit The Login Page
192.168.123.254Direct Login
192.168.1.1Direct Login

Pick Your Router From Below

4G Systems Default Password And Username

4G Systems Model 4G Systems Username4G Systems Password
XSBox LTE Plusadminpassword
XSBox GO+-password
XSBox R6v-42admin-
XSStick LTE Plus-password
XSBox Moveuser-
XSBox R6vuserpassword

How To Login To 4G Systems Router Admin Page?

I know that you want to login to your 4G Systems XSBox LTE Plus or any other model that you may have. Let’s not wait anymore but make sure that you have made a note of the default IP addresses. Okay, let’s check out the steps that take you to the 4GSystems Admin Panel.

  1. Open the web browser on your laptop or a smartphone.
  2. But, before that you need to connect your device to the 4G Systems router via hotspot or wired connection.
  3. Now, enter 192.168.123.254 in your web browser. The IP address may contain http:// at the front of the IP address but it should not contain https://.
  4. Whenever the page loads up completely, just enter the login details. Don’t have? not to worry, you have the details in this page (check above).
  5. Finally, hit “Login” button and done! you are successfully logged in.

Frequently Asked Questions

1. How Do I Log Into 4G Systems XSBox R6v-42 Router?

The login process of any 4G Systems router model is the same. Open the admin portal with the default gateway IP Address 192.168.123.254 in the browser and put in the login details.

2. How To Restore 4G Systems XSStick LTE Plus Router Settings?

Since it is a handy device to carry out, you may see the reset pin hole at the back of the router. Take a paperclip and press in that hole for about 10 seconds. Now, you should see that you router is restored to default settings.

3. How To Change 4G Systems XSBox GO+ Login Password?

In order to change the login password of your XSBox Go Plus, you need to first log into the admin panel. Read the guidelines shared in this article for logging in first of all. Then, you should go to “Wireless Settings” section on the portal. Edit the current password and enter the new one and save it.

Wrapping Up

Selection of the router might be yours and of course, it is also not our job to suggest you about it. But still, we are here with you. We have shared the tips and step by step instructions for logging in to 4G Systems Router admin panel. Let us know in the comments about the article, we consider your opinion and it’s matter to us the most.

Leave a Reply

Your email address will not be published.

Scroll to top